SharkBite 1/2-in x 50-ft White PEX-B Pipe
$23.38
- Made in USA
- Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
- Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009
SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak points. PEX is also extremely durable and corrosion/freeze resistant. SharkBite PEX is compatible with brass or plastic barb fittings using copper crimp ring or stainless steel clamp connection methods or push-to-connect fittings.
- Made in USA
- Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
- Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009
- Minimum working temperature 33 degrees F at 160 PSI
- Maximum working temperature 200 degrees F at 80 PSI
- Maximum working pressure is 160 PSI at 33 degrees F – 70 degrees F (see spec sheet for more detail)
- Approved for water service lines and burial applications including being buried under concrete
- Highest-rated chlorine resistance, six-month UV resistance
- Approved for use with push-to-connect (ASSE 1061), plastic barb (ASTM F2159), and brass barb (ASTM F1807) fittings
| Weight | 2.721 kg |
|---|---|
| Dimensions | 23.5 × 23.5 × 2.5 cm |
| Brand | SharkBite |
15 reviews for SharkBite 1/2-in x 50-ft White PEX-B Pipe
Add a review
Related products
$17.68
Pipe & Fittings
Circo Innovations 2-in PVC 3-Way 90 Degree Side Outlet Elbow
$15.09
Fittings & Specialty Tools
$17.38
Pipe & Fittings
$17.98
Pipe & Fittings
$32.04
Pipe & Fittings
$28.85
Pipe & Fittings
SharkBite 3/4-in x 3/4-in x 3/4-in Push-to-Connect Standard Tee
$15.38
Pipe & Fittings
$16.98
Anonymous –
durable product, no issues
Anonymous –
I needed a hot and cold run, each about 26′ feet. Was cheaper to just run it all in blue and get 100′ than to buy to 2 50′ of each color.
Anonymous –
A lot easier to use than pvc pipe.
Anonymous –
What’s not to like about PEX-B Pipe? Excellent choice for replacing old fragile, split or cracked, frozen PVC or PVC water lines. PEX-B is flexible and remains flexible. Though available in white, why not replace lines with BLUE or RED PEX-B Pipe to quickly and easily identify Hot and Cold water lines without having to trace lines back to their source. A quick glance and you’ll know if you’re working with Hot (RED) or Cold (BLUE) water lines in the future. Quick and easy to cut, install and use with SharkBite® couplings. PEX-B Pipe and SharkBite® ARE the future of plumbing and with good reason. No, purple primer, no stinky glue, no wait time for drying. When used with SharkBite® couplings, everything is push to connect easy. The stainless steel “teeth” in the SharkBite® couplings bite into the pipe, preventing the pipe from popping back out. With the proprietary chlorine resistant “O” ring, in the couplings, you can be assured of no leaks with SharkBite®’s 25 year warranty.
Anonymous –
I ordered at 10:30 PM. It was ready at 7:15 the next morning. I drove up, told them I was there, and they were out in less than 5 minutes. Nice job !!!
Anonymous –
This material, PEX is a superior product weather using Sharkbite or Crimp connections. It must be supported properly and most important is to support it within 8-10 inches from the joint. Critical support should be placed on the pipe that equalizes the pressure on the O ring or crimp. In other words do no let the pipe push down or up on the connection. Zero gravity will ensure a long joint life. The best way to cut this stuff is with a tubing cutter, partially, then slice thru with a razor, not shears. This ensures that the tubing remains a perfect circle. Would you cut copper tubing with shears. The use of shears on this product ensures early joint failure. I’ve used this stuff for 25 years and never had a joint leak!!
Anonymous –
Liked the 20 ft length
Anonymous –
It works , but I needed 3/4 in . But I got a 1/2 in.
Anonymous –
1/2″ pex supply lines were in stock and ready to go.
Anonymous –
This was more than enough for my project and worked well for what I needed.
Anonymous –
Easy to cut into custom lengths; I’m using it to support hail netting over my garden beds. Some people use PVC pipe, and that might be better because this is pretty flexible, but overall it works well.
Anonymous –
I have built and currently live in my tiny house and I used Uponor Pex products for the entire build. I never once experienced any problems or leakage with their products.
When I wanted to add a line for my washer, I saw that sold Pex-A piping and that it was about $15 cheaper than Uponor. I figured that since it met all of the requirements to be called Pex-A that it would be just as good. This was incorrect.
I experienced leaks multiple times with new Sharkbite fittings (brass & plastic). I had to redo multiple sections due to leaks and I do not trust this product at all. I will be swapping this out with Uponor products as soon as they come in this week.
I noticed that this product does not seal properly when using Sharkbite’s Pex-A 1/2″ rings. Literally 50% of the time it would leak and I’d have to start over. I then tried using some of my remaining Uponor rings and found that I no longer experienced any leakage. It also takes about twice as long for the connection to feel tight when installed. I don’t like how easy it is to rotate the fittings when compared to Uponor’s (Very snug). I may have had a bad batch, but in the future I’ll just stick with Uponor.
— I used the Milwaukee’s M12 ProPex tool to do the expanding.
Anonymous –
I did not use this for water but for a marker on edge of my snow blade. When plowing snow I needed something flexible that would not break when snow or tree branches hit it. Pex tubing is cheaper than the fiberglass rods that come with the snow blade and work better than the fiberglass rods.
Anonymous –
The 1/2 ” PEX tube X 50 feet is fine. I ordered on line and it took a long time to arrive. I don’t know why the store doesn’t just let me buy part of a long roll. I can buy wire and chain by the foot, why not PEX tubing. I don’t always need 100 feet. It all gets sold in the end with out the wait. Go get it, get it installed.
Anonymous –
For this to work you have to purchase a special tool. $80.00 and the person selling plumbing had no idea of that or anything else in that department.